Arduino Car Projects
|
Torrent File Contents
Arduino Car Projects
[TutsNode.net] - 3 - Assembly Core Hardware/16 - 0311 Assemble the car kit.mp4
TutsNode.net.txt
[TGx]Downloaded from torrentgalaxy.buzz .txt
.pad/0
[TutsNode.net] - 1 - Introduction/2 - 0120 Hardware and kit overview.mp4
.pad/1
[TutsNode.net] - 2 - Getting to know the hardware/7 - 0240 Motors and motor drivers.mp4
.pad/2
[TutsNode.net] - 2 - Getting to know the hardware/11 - 0280 ESP01S WiFi module Configuration wiring.mp4
.pad/3
[TutsNode.net] - 4 - Project 1 Simple wired control/22 - 0440 Arduino motor control sketch.mp4
.pad/4
[TutsNode.net] - 2 - Getting to know the hardware/10 - 0270 The Bluetooth BLE ACBTV4 module.mp4
.pad/5
[TutsNode.net] - 2 - Getting to know the hardware/4 - 0210 Car chassis.mp4
.pad/6
[TutsNode.net] - 8 - Improvements/47 - 870 Use the EN pins for speed control.mp4
.pad/7
[TutsNode.net] - 8 - Improvements/41 - 810 Speed control with the joystick.mp4
.pad/8
[TutsNode.net] - 8 - Improvements/46 - 860 Independent power source for the motors.mp4
.pad/9
[TutsNode.net] - 1 - Introduction/1 - 0110 What is this course about.mp4
.pad/10
[TutsNode.net] - 8 - Improvements/44 - 840 Fix notstraight drive.mp4
.pad/11
[TutsNode.net] - 3 - Assembly Core Hardware/18 - 0330 Battery and power.mp4
.pad/12
[TutsNode.net] - 3 - Assembly Core Hardware/17 - 0320 Wire the motors.mp4
.pad/13
[TutsNode.net] - 5 - Project 2 Remote control with infrared/27 - 0540 Arduino motor IR control sketch.mp4
.pad/14
[TutsNode.net] - 2 - Getting to know the hardware/9 - 0260 The HCSR04 ultrasonic sensor.mp4
.pad/15
[TutsNode.net] - 2 - Getting to know the hardware/8 - 0250 The infrared sensor.mp4
.pad/16
[TutsNode.net] - 2 - Getting to know the hardware/5 - 0220 Microcontroller.mp4
.pad/17
[TutsNode.net] - 2 - Getting to know the hardware/14 - 0283 ESP01S WiFi module Simple LED control with Blynk.mp4
.pad/18
[TutsNode.net] - 4 - Project 1 Simple wired control/21 - 0430 Wiring and cabling.mp4
.pad/19
[TutsNode.net] - 7 - Project 4 Remote control with WiFi and mobile phone via Blynk/39 - 0760 Arduino motor control sketch.mp4
.pad/20
[TutsNode.net] - 2 - Getting to know the hardware/6 - 0230 The joystick.mp4
.pad/21
[TutsNode.net] - 3 - Assembly Core Hardware/15 - 0310 Assemble the car kit preparation.mp4
.pad/22
[TutsNode.net] - 6 - Project 3 Remote control with Bluetooth BLE mobile app/32 - 0640 Arduino motor control sketch.mp4
.pad/23
[TutsNode.net] - 8 - Improvements/43 - 830 Make the car beep with the buzzer.mp4
.pad/24
[TutsNode.net] - 8 - Improvements/42 - 820 Ultrasonic anticrash system.mp4
.pad/25
[TutsNode.net] - 8 - Improvements/45 - 850 Motor startstop button.mp4
.pad/26
[TutsNode.net] - 2 - Getting to know the hardware/12 - 0281 ESP01S WiFi module Configuration AT commands.mp4
.pad/27
[TutsNode.net] - 7 - Project 4 Remote control with WiFi and mobile phone via Blynk/38 - 0750 Setup Blynk mobile dashboard.mp4
.pad/28
[TutsNode.net] - 4 - Project 1 Simple wired control/20 - 0420 Quick joystick demonstration.mp4
.pad/29
[TutsNode.net] - 6 - Project 3 Remote control with Bluetooth BLE mobile app/31 - 0630 ArduinoBlue app control UI.mp4
.pad/30
[TutsNode.net] - 1 - Introduction/3 - 0140 How to make the most out of this course.mp4
.pad/31
[TutsNode.net] - 7 - Project 4 Remote control with WiFi and mobile phone via Blynk/35 - 0720 ESP01S module wiring.mp4
.pad/32
[TutsNode.net] - 7 - Project 4 Remote control with WiFi and mobile phone via Blynk/37 - 0740 Setup RC Car Blynk project.mp4
.pad/33
[TutsNode.net] - 5 - Project 2 Remote control with infrared/25 - 0520 Wiring.mp4
.pad/34
[TutsNode.net] - 2 - Getting to know the hardware/13 - 0282 ESP01S WiFi module Create Blynk account and project.mp4
.pad/35
[TutsNode.net] - 6 - Project 3 Remote control with Bluetooth BLE mobile app/30 - 0620 Bluetooth BLE wiring.mp4
.pad/36
[TutsNode.net] - 7 - Project 4 Remote control with WiFi and mobile phone via Blynk/40 - 0770 Testing.mp4
.pad/37
[TutsNode.net] - 7 - Project 4 Remote control with WiFi and mobile phone via Blynk/34 - 0710 Project introduction and objectives.mp4
.pad/38
[TutsNode.net] - 7 - Project 4 Remote control with WiFi and mobile phone via Blynk/36 - 0730 Verify WiFi connectivity to Blynk.mp4
.pad/39
[TutsNode.net] - 5 - Project 2 Remote control with infrared/28 - 0550 Testing.mp4
.pad/40
[TutsNode.net] - 6 - Project 3 Remote control with Bluetooth BLE mobile app/33 - 0650 Testing.mp4
.pad/41
[TutsNode.net] - 5 - Project 2 Remote control with infrared/24 - 0510 Project introduction objectives.mp4
.pad/42
[TutsNode.net] - 4 - Project 1 Simple wired control/23 - 0450 Testing.mp4
.pad/43
[TutsNode.net] - 5 - Project 2 Remote control with infrared/26 - 0530 IR remote control and sensor testing.mp4
.pad/44
[TutsNode.net] - 4 - Project 1 Simple wired control/19 - 0410 Project introduction objectives.mp4
.pad/45
[TutsNode.net] - 6 - Project 3 Remote control with Bluetooth BLE mobile app/29 - 0610 Project introduction and objectives.mp4
[TutsNode.net] - 3 - Assembly Core Hardware/16 - 0311 Assemble the car kit.mp4
- 362.15 MB
TutsNode.net.txt
- 63 Bytes
[TGx]Downloaded from torrentgalaxy.buzz .txt
- 585 Bytes
.pad/0
- 868.34 KB
[TutsNode.net] - 1 - Introduction/2 - 0120 Hardware and kit overview.mp4
- 285.63 MB
.pad/1
- 383.78 KB
[TutsNode.net] - 2 - Getting to know the hardware/7 - 0240 Motors and motor drivers.mp4
- 271.82 MB
.pad/2
- 186.22 KB
[TutsNode.net] - 2 - Getting to know the hardware/11 - 0280 ESP01S WiFi module Configuration wiring.mp4
- 241.08 MB
.pad/3
- 937.48 KB
[TutsNode.net] - 4 - Project 1 Simple wired control/22 - 0440 Arduino motor control sketch.mp4
- 234.02 MB
.pad/4
- 1007.14 KB
[TutsNode.net] - 2 - Getting to know the hardware/10 - 0270 The Bluetooth BLE ACBTV4 module.mp4
- 226.91 MB
.pad/5
- 93.44 KB
[TutsNode.net] - 2 - Getting to know the hardware/4 - 0210 Car chassis.mp4
- 222.08 MB
.pad/6
- 940.19 KB
[TutsNode.net] - 8 - Improvements/47 - 870 Use the EN pins for speed control.mp4
- 214.5 MB
.pad/7
- 516.18 KB
[TutsNode.net] - 8 - Improvements/41 - 810 Speed control with the joystick.mp4
- 214.49 MB
.pad/8
- 522.09 KB
[TutsNode.net] - 8 - Improvements/46 - 860 Independent power source for the motors.mp4
- 209.69 MB
.pad/9
- 314.42 KB
[TutsNode.net] - 1 - Introduction/1 - 0110 What is this course about.mp4
- 202.35 MB
.pad/10
- 670.35 KB
[TutsNode.net] - 8 - Improvements/44 - 840 Fix notstraight drive.mp4
- 193.88 MB
.pad/11
- 120.99 KB
[TutsNode.net] - 3 - Assembly Core Hardware/18 - 0330 Battery and power.mp4
- 189.75 MB
.pad/12
- 256.46 KB
[TutsNode.net] - 3 - Assembly Core Hardware/17 - 0320 Wire the motors.mp4
- 181.66 MB
.pad/13
- 350.96 KB
[TutsNode.net] - 5 - Project 2 Remote control with infrared/27 - 0540 Arduino motor IR control sketch.mp4
- 178.5 MB
.pad/14
- 515.98 KB
[TutsNode.net] - 2 - Getting to know the hardware/9 - 0260 The HCSR04 ultrasonic sensor.mp4
- 176.56 MB
.pad/15
- 450.31 KB
[TutsNode.net] - 2 - Getting to know the hardware/8 - 0250 The infrared sensor.mp4
- 159.26 MB
.pad/16
- 753.15 KB
[TutsNode.net] - 2 - Getting to know the hardware/5 - 0220 Microcontroller.mp4
- 151.98 MB
.pad/17
- 24.91 KB
[TutsNode.net] - 2 - Getting to know the hardware/14 - 0283 ESP01S WiFi module Simple LED control with Blynk.mp4
- 145.47 MB
.pad/18
- 538.31 KB
[TutsNode.net] - 4 - Project 1 Simple wired control/21 - 0430 Wiring and cabling.mp4
- 136.96 MB
.pad/19
- 38.46 KB
[TutsNode.net] - 7 - Project 4 Remote control with WiFi and mobile phone via Blynk/39 - 0760 Arduino motor control sketch.mp4
- 133.65 MB
.pad/20
- 353.9 KB
[TutsNode.net] - 2 - Getting to know the hardware/6 - 0230 The joystick.mp4
- 131.61 MB
.pad/21
- 395.5 KB
[TutsNode.net] - 3 - Assembly Core Hardware/15 - 0310 Assemble the car kit preparation.mp4
- 128.2 MB
.pad/22
- 816.56 KB
[TutsNode.net] - 6 - Project 3 Remote control with Bluetooth BLE mobile app/32 - 0640 Arduino motor control sketch.mp4
- 128.09 MB
.pad/23
- 935.43 KB
[TutsNode.net] - 8 - Improvements/43 - 830 Make the car beep with the buzzer.mp4
- 122.7 MB
.pad/24
- 304.51 KB
[TutsNode.net] - 8 - Improvements/42 - 820 Ultrasonic anticrash system.mp4
- 112 MB
.pad/25
- 3.42 KB
[TutsNode.net] - 8 - Improvements/45 - 850 Motor startstop button.mp4
- 111.64 MB
.pad/26
- 365.28 KB
[TutsNode.net] - 2 - Getting to know the hardware/12 - 0281 ESP01S WiFi module Configuration AT commands.mp4
- 111.16 MB
.pad/27
- 865 KB
[TutsNode.net] - 7 - Project 4 Remote control with WiFi and mobile phone via Blynk/38 - 0750 Setup Blynk mobile dashboard.mp4
- 108.28 MB
.pad/28
- 736.1 KB
[TutsNode.net] - 4 - Project 1 Simple wired control/20 - 0420 Quick joystick demonstration.mp4
- 105.03 MB
.pad/29
- 990.69 KB
[TutsNode.net] - 6 - Project 3 Remote control with Bluetooth BLE mobile app/31 - 0630 ArduinoBlue app control UI.mp4
- 93.79 MB
.pad/30
- 210.41 KB
[TutsNode.net] - 1 - Introduction/3 - 0140 How to make the most out of this course.mp4
- 81.37 MB
.pad/31
- 642.12 KB
[TutsNode.net] - 7 - Project 4 Remote control with WiFi and mobile phone via Blynk/35 - 0720 ESP01S module wiring.mp4
- 79.35 MB
.pad/32
- 664.95 KB
[TutsNode.net] - 7 - Project 4 Remote control with WiFi and mobile phone via Blynk/37 - 0740 Setup RC Car Blynk project.mp4
- 75.46 MB
.pad/33
- 557.55 KB
[TutsNode.net] - 5 - Project 2 Remote control with infrared/25 - 0520 Wiring.mp4
- 73.3 MB
.pad/34
- 719.48 KB
[TutsNode.net] - 2 - Getting to know the hardware/13 - 0282 ESP01S WiFi module Create Blynk account and project.mp4
- 60.46 MB
.pad/35
- 556.17 KB
[TutsNode.net] - 6 - Project 3 Remote control with Bluetooth BLE mobile app/30 - 0620 Bluetooth BLE wiring.mp4
- 60.31 MB
.pad/36
- 710.68 KB
[TutsNode.net] - 7 - Project 4 Remote control with WiFi and mobile phone via Blynk/40 - 0770 Testing.mp4
- 56.97 MB
.pad/37
- 35.79 KB
[TutsNode.net] - 7 - Project 4 Remote control with WiFi and mobile phone via Blynk/34 - 0710 Project introduction and objectives.mp4
- 50.23 MB
.pad/38
- 784.66 KB
[TutsNode.net] - 7 - Project 4 Remote control with WiFi and mobile phone via Blynk/36 - 0730 Verify WiFi connectivity to Blynk.mp4
- 49.32 MB
.pad/39
- 696.84 KB
[TutsNode.net] - 5 - Project 2 Remote control with infrared/28 - 0550 Testing.mp4
- 49.15 MB
.pad/40
- 875.29 KB
[TutsNode.net] - 6 - Project 3 Remote control with Bluetooth BLE mobile app/33 - 0650 Testing.mp4
- 45.09 MB
.pad/41
- 936.26 KB
[TutsNode.net] - 5 - Project 2 Remote control with infrared/24 - 0510 Project introduction objectives.mp4
- 41.1 MB
.pad/42
- 925.32 KB
[TutsNode.net] - 4 - Project 1 Simple wired control/23 - 0450 Testing.mp4
- 40.48 MB
.pad/43
- 527.46 KB
[TutsNode.net] - 5 - Project 2 Remote control with infrared/26 - 0530 IR remote control and sensor testing.mp4
- 39.21 MB
.pad/44
- 809.54 KB
[TutsNode.net] - 4 - Project 1 Simple wired control/19 - 0410 Project introduction objectives.mp4
- 31.03 MB
.pad/45
- 990.05 KB
[TutsNode.net] - 6 - Project 3 Remote control with Bluetooth BLE mobile app/29 - 0610 Project introduction and objectives.mp4
- 29.48 MB
Torrent Description
Description
Arduino Car Projects is ideal for new Arduino Makers and graduates of Arduino Step by Step Getting Started.
Use your Arduino Uno and programs to control a car with motors and sensors.
Use a joystick, an infrared controller, and a smartphone to drive your Arduino car.
This course is an opportunity to apply your new Arduino knowledge in a series of small projects with a common theme: the Arduino Car.
Learn how to combine various hardware components to create an Arduino car with many fun features. Control your car with a joystick or with your phone. Learn how to wire motors and decode signals from an infrared controller (and much more).
This course teaches essential Arduino and programming skills through a series of fun mini-projects of increasing complexity.
Each mini-project allows you to explore interesting hardware and programming topics.
For example, you will explore vehicle safety using an ultrasonic distance sensor in one project.
In another project, you will learn how to control the Arduino car with your smartphone.
You will learn how to program motors, take input from sensors to implement automation features, and explore various options to control your car.
In this course, you will learn software skills, such as:
How to program car functions with the infrared remote control.
How to use Bluetooth Low Energy, your smartphone, and the ArduinoBlue library to control the Arduino car.
How to use the ESP01S wifi module, the Blink cloud platform, and your smartphone to control the Arduino car and its peripherals.
How to compensate for tiny differences between the motors that affect the driving qualities of the car.
How to use the distance sensor to prevent a crash.
Two different ways to control the speed of the DC motors.
In this course, you will learn to use an Arduino Uno along with various peripherals, such as:
One or two DC motors with the help of a motor controller module.
An analog joystick.
An infrared sensor that can receive encoded commands from an infrared remote control.
An ultrasonic distance sensor.
A buzzer.
And two radio frequency communications modules:
A Bluetooth BLE module for near-field connectivity.
An ESP01S Wifi module for Internet connectivity.
You will also learn how to power your Arduino motor project with one or two batteries to separate the Arduino and motor sub-circuits.
What hardware will you need?
This course requires an Arduino Uno or compatible board, a car chassis, motors, sensors, wires and other components.
This hardware is not included in this course; you must source it separately.
You can purchase these items as part of a kit sold by Sunfounder or individually from your preferred retailer.
You can find a complete listing of the hardware you will need for this course in the course hardware lecture (free to watch before you purchase this course).
Who this course is for:
Learners who have just completed Arduino Step by Step Getting Started or equivelant course, or have beginner-level Arduino skills.
Requirements
Basic Arduino programming and wiring.
Last Updated 3/2023