Automobile Hacking and Security v2 0
|
Torrent File Contents
Automobile Hacking and Security v2 0
[TutsNode.net] - 4. 03-CaringCaribou Tool for Vulnerability Testing/4. 04-Fuzzer Brute Force.mp4
TutsNode.net.txt
[TutsNode.net] - 4. 03-CaringCaribou Tool for Vulnerability Testing/1.1 01-Installing CaringCaribou.pdf
[TGx]Downloaded from torrentgalaxy.buzz .txt
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/3.3 I2CAddressFinder.zip
[TutsNode.net] - 2. 01-Overview of CAN Protocol and CAN-Utils/2.1 02-can-utils-commands.txt
[TutsNode.net] - 4. 03-CaringCaribou Tool for Vulnerability Testing/1.2 canrc.zip
[TutsNode.net] - 3. 02-Car Simulator Advance/1.1 command.txt
.pad/0
[TutsNode.net] - 8. 07-Practical Demo on Car with CaringCaribou/1. 01-Connecting Device with Car.mp4
[TutsNode.net] - 7. 06-Creating Device with MCP2515/1.1 01-MCP2515 Module.pdf
.pad/1
[TutsNode.net] - 10. 09-Reverse Engineering CAN Packets/1. 01-MitM on ECU Model.mp4
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/3.4 OLED_bb.pdf
.pad/2
[TutsNode.net] - 10. 09-Reverse Engineering CAN Packets/2. 02-Sniffing Data and Reply.mp4
.pad/3
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/5. 05-Receiver Device.mp4
[TutsNode.net] - 7. 06-Creating Device with MCP2515/1.3 Mcp2515-Connection-withoutbreadboard_bb.pdf
.pad/4
[TutsNode.net] - 1. Introduction/2. 02-Hardware Requirements.mp4
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/2.1 hardware-requirements.pdf
.pad/5
[TutsNode.net] - 6. 05-OBD2 Advance Concepts/3. 03-Creating Universal OBD2 Connector.mp4
[TutsNode.net] - 2. 01-Overview of CAN Protocol and CAN-Utils/1.1 01-Overview of CAN Protocol.pdf
.pad/6
[TutsNode.net] - 4. 03-CaringCaribou Tool for Vulnerability Testing/1. 01-Installing CaringCaribou.mp4
[TutsNode.net] - 7. 06-Creating Device with MCP2515/1.2 Mcp2515-Connection_bb.pdf
.pad/7
[TutsNode.net] - 5. 04-CANAnalyzer Tool for Vulnerability Testing/2. 02-Starting CANAnalyzer tool.mp4
[TutsNode.net] - 7. 06-Creating Device with MCP2515/3.1 03-Arduino Device code for CAN-Utils.pdf
.pad/8
[TutsNode.net] - 8. 07-Practical Demo on Car with CaringCaribou/3. 03-Getting Unique IDS.mp4
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/4.1 ECU-Model.pdf
.pad/9
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/4. 04-Sender Device.mp4
[TutsNode.net] - 6. 05-OBD2 Advance Concepts/2.1 02-Types of OBD2 Protocols.pdf
.pad/10
[TutsNode.net] - 11. 10-Appendix Soldering Crash Course/4. 04-Soldering on Prototype Board.mp4
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/3.1 Display Data on OLED.pdf
.pad/11
[TutsNode.net] - 7. 06-Creating Device with MCP2515/2. 02-MCP2515 Device Variants.mp4
[TutsNode.net] - 1. Introduction/2.1 hardware-requirements.pdf
.pad/12
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/2. 02-Hardware Requirements for ECU Model.mp4
[TutsNode.net] - 2. 01-Overview of CAN Protocol and CAN-Utils/2.2 02-Overview of CAN-Utils.pdf
.pad/13
[TutsNode.net] - 5. 04-CANAnalyzer Tool for Vulnerability Testing/3. 03-Sniff and Send CAN Packets.mp4
[TutsNode.net] - 7. 06-Creating Device with MCP2515/1.4 Mcp2515-Uno_bb.pdf
.pad/14
[TutsNode.net] - 11. 10-Appendix Soldering Crash Course/2. 02-Tools for Soldering.mp4
.pad/15
[TutsNode.net] - 4. 03-CaringCaribou Tool for Vulnerability Testing/2. 02-Capture and Replay Attack.mp4
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/5.1 ECU-Model.pdf
.pad/16
[TutsNode.net] - 11. 10-Appendix Soldering Crash Course/6. 06-Soldering Wires.mp4
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/3.2 hardware-requirements.pdf
.pad/17
[TutsNode.net] - 10. 09-Reverse Engineering CAN Packets/3. 03-Sending Specific CAN Packets.mp4
.pad/18
[TutsNode.net] - 11. 10-Appendix Soldering Crash Course/7. 07-Pad Surface Soldering.mp4
[TutsNode.net] - 5. 04-CANAnalyzer Tool for Vulnerability Testing/1.1 01-Installing CANAnalyzer with Docker.pdf
.pad/19
[TutsNode.net] - 2. 01-Overview of CAN Protocol and CAN-Utils/2. 02-Overview of CAN-Utils.mp4
.pad/20
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/1. 01-Final ECU Model with MCP2515.mp4
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/5.2 RECEIVER_bb.pdf
.pad/21
[TutsNode.net] - 11. 10-Appendix Soldering Crash Course/5. 05-Soldering Header Pins.mp4
[TutsNode.net] - 6. 05-OBD2 Advance Concepts/1.1 01-What is OBD2.pdf
.pad/22
[TutsNode.net] - 5. 04-CANAnalyzer Tool for Vulnerability Testing/4. 04-Packet Searcher.mp4
.pad/23
[TutsNode.net] - 8. 07-Practical Demo on Car with CaringCaribou/2. 02-Capture and Replay.mp4
.pad/24
[TutsNode.net] - 4. 03-CaringCaribou Tool for Vulnerability Testing/5. 05-Unified Diagnostics Services (UDS).mp4
.pad/25
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/3. 03-Display Data on OLED.mp4
.pad/26
[TutsNode.net] - 5. 04-CANAnalyzer Tool for Vulnerability Testing/1. 01-Installing CANAnalyzer with Docker.mp4
.pad/27
[TutsNode.net] - 6. 05-OBD2 Advance Concepts/2. 02-Types of OBD2 Protocols.mp4
.pad/28
[TutsNode.net] - 3. 02-Car Simulator Advance/1. 01-Car Simulator Advance.mp4
.pad/29
[TutsNode.net] - 11. 10-Appendix Soldering Crash Course/8. 08-Pinhole Soldering.mp4
.pad/30
[TutsNode.net] - 1. Introduction/1. Introduction.mp4
.pad/31
[TutsNode.net] - 2. 01-Overview of CAN Protocol and CAN-Utils/1. 01-Overview of CAN Protocol.mp4
.pad/32
[TutsNode.net] - 4. 03-CaringCaribou Tool for Vulnerability Testing/3. 03-Get Unique IDs.mp4
.pad/33
[TutsNode.net] - 7. 06-Creating Device with MCP2515/3. 03-Arduino Device code for CAN-Utils.mp4
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/4.2 SENDER_bb.pdf
.pad/34
[TutsNode.net] - 7. 06-Creating Device with MCP2515/1. 01-MCP2515 Module.mp4
.pad/35
[TutsNode.net] - 11. 10-Appendix Soldering Crash Course/1. 01-Introduction and Precautions.mp4
.pad/36
[TutsNode.net] - 11. 10-Appendix Soldering Crash Course/3. 03-Basic rules of Soldering.mp4
.pad/37
[TutsNode.net] - 6. 05-OBD2 Advance Concepts/1. 01-What is OBD2.mp4
[TutsNode.net] - 4. 03-CaringCaribou Tool for Vulnerability Testing/4. 04-Fuzzer Brute Force.mp4
- 190.7 MB
TutsNode.net.txt
- 63 Bytes
[TutsNode.net] - 4. 03-CaringCaribou Tool for Vulnerability Testing/1.1 01-Installing CaringCaribou.pdf
- 258.27 KB
[TGx]Downloaded from torrentgalaxy.buzz .txt
- 585 Bytes
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/3.3 I2CAddressFinder.zip
- 526 Bytes
[TutsNode.net] - 2. 01-Overview of CAN Protocol and CAN-Utils/2.1 02-can-utils-commands.txt
- 187 Bytes
[TutsNode.net] - 4. 03-CaringCaribou Tool for Vulnerability Testing/1.2 canrc.zip
- 158 Bytes
[TutsNode.net] - 3. 02-Car Simulator Advance/1.1 command.txt
- 60 Bytes
.pad/0
- 50.61 KB
[TutsNode.net] - 8. 07-Practical Demo on Car with CaringCaribou/1. 01-Connecting Device with Car.mp4
- 176.5 MB
[TutsNode.net] - 7. 06-Creating Device with MCP2515/1.1 01-MCP2515 Module.pdf
- 421.63 KB
.pad/1
- 90.82 KB
[TutsNode.net] - 10. 09-Reverse Engineering CAN Packets/1. 01-MitM on ECU Model.mp4
- 175.35 MB
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/3.4 OLED_bb.pdf
- 649.42 KB
.pad/2
- 16.14 KB
[TutsNode.net] - 10. 09-Reverse Engineering CAN Packets/2. 02-Sniffing Data and Reply.mp4
- 162.98 MB
.pad/3
- 24.77 KB
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/5. 05-Receiver Device.mp4
- 125.48 MB
[TutsNode.net] - 7. 06-Creating Device with MCP2515/1.3 Mcp2515-Connection-withoutbreadboard_bb.pdf
- 408.95 KB
.pad/4
- 121.35 KB
[TutsNode.net] - 1. Introduction/2. 02-Hardware Requirements.mp4
- 117.81 MB
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/2.1 hardware-requirements.pdf
- 177.45 KB
.pad/5
- 14.16 KB
[TutsNode.net] - 6. 05-OBD2 Advance Concepts/3. 03-Creating Universal OBD2 Connector.mp4
- 117.31 MB
[TutsNode.net] - 2. 01-Overview of CAN Protocol and CAN-Utils/1.1 01-Overview of CAN Protocol.pdf
- 608.27 KB
.pad/6
- 97.25 KB
[TutsNode.net] - 4. 03-CaringCaribou Tool for Vulnerability Testing/1. 01-Installing CaringCaribou.mp4
- 86.15 MB
[TutsNode.net] - 7. 06-Creating Device with MCP2515/1.2 Mcp2515-Connection_bb.pdf
- 742.27 KB
.pad/7
- 132.36 KB
[TutsNode.net] - 5. 04-CANAnalyzer Tool for Vulnerability Testing/2. 02-Starting CANAnalyzer tool.mp4
- 71.79 MB
[TutsNode.net] - 7. 06-Creating Device with MCP2515/3.1 03-Arduino Device code for CAN-Utils.pdf
- 195.28 KB
.pad/8
- 24.29 KB
[TutsNode.net] - 8. 07-Practical Demo on Car with CaringCaribou/3. 03-Getting Unique IDS.mp4
- 69.78 MB
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/4.1 ECU-Model.pdf
- 191.92 KB
.pad/9
- 32.26 KB
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/4. 04-Sender Device.mp4
- 69.41 MB
[TutsNode.net] - 6. 05-OBD2 Advance Concepts/2.1 02-Types of OBD2 Protocols.pdf
- 558.42 KB
.pad/10
- 40.64 KB
[TutsNode.net] - 11. 10-Appendix Soldering Crash Course/4. 04-Soldering on Prototype Board.mp4
- 68.72 MB
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/3.1 Display Data on OLED.pdf
- 226.76 KB
.pad/11
- 64.15 KB
[TutsNode.net] - 7. 06-Creating Device with MCP2515/2. 02-MCP2515 Device Variants.mp4
- 68.58 MB
[TutsNode.net] - 1. Introduction/2.1 hardware-requirements.pdf
- 384.13 KB
.pad/12
- 44.15 KB
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/2. 02-Hardware Requirements for ECU Model.mp4
- 67.35 MB
[TutsNode.net] - 2. 01-Overview of CAN Protocol and CAN-Utils/2.2 02-Overview of CAN-Utils.pdf
- 533.82 KB
.pad/13
- 131.23 KB
[TutsNode.net] - 5. 04-CANAnalyzer Tool for Vulnerability Testing/3. 03-Sniff and Send CAN Packets.mp4
- 66.56 MB
[TutsNode.net] - 7. 06-Creating Device with MCP2515/1.4 Mcp2515-Uno_bb.pdf
- 373.18 KB
.pad/14
- 75.53 KB
[TutsNode.net] - 11. 10-Appendix Soldering Crash Course/2. 02-Tools for Soldering.mp4
- 65.97 MB
.pad/15
- 27.12 KB
[TutsNode.net] - 4. 03-CaringCaribou Tool for Vulnerability Testing/2. 02-Capture and Replay Attack.mp4
- 57.76 MB
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/5.1 ECU-Model.pdf
- 191.92 KB
.pad/16
- 49.65 KB
[TutsNode.net] - 11. 10-Appendix Soldering Crash Course/6. 06-Soldering Wires.mp4
- 56.79 MB
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/3.2 hardware-requirements.pdf
- 177.45 KB
.pad/17
- 33.21 KB
[TutsNode.net] - 10. 09-Reverse Engineering CAN Packets/3. 03-Sending Specific CAN Packets.mp4
- 55.95 MB
.pad/18
- 50.28 KB
[TutsNode.net] - 11. 10-Appendix Soldering Crash Course/7. 07-Pad Surface Soldering.mp4
- 53.68 MB
[TutsNode.net] - 5. 04-CANAnalyzer Tool for Vulnerability Testing/1.1 01-Installing CANAnalyzer with Docker.pdf
- 317.28 KB
.pad/19
- 11.49 KB
[TutsNode.net] - 2. 01-Overview of CAN Protocol and CAN-Utils/2. 02-Overview of CAN-Utils.mp4
- 52.76 MB
.pad/20
- 245.7 KB
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/1. 01-Final ECU Model with MCP2515.mp4
- 51.02 MB
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/5.2 RECEIVER_bb.pdf
- 938.91 KB
.pad/21
- 66.47 KB
[TutsNode.net] - 11. 10-Appendix Soldering Crash Course/5. 05-Soldering Header Pins.mp4
- 50.35 MB
[TutsNode.net] - 6. 05-OBD2 Advance Concepts/1.1 01-What is OBD2.pdf
- 344.26 KB
.pad/22
- 320.29 KB
[TutsNode.net] - 5. 04-CANAnalyzer Tool for Vulnerability Testing/4. 04-Packet Searcher.mp4
- 48.29 MB
.pad/23
- 725.13 KB
[TutsNode.net] - 8. 07-Practical Demo on Car with CaringCaribou/2. 02-Capture and Replay.mp4
- 47.57 MB
.pad/24
- 441.48 KB
[TutsNode.net] - 4. 03-CaringCaribou Tool for Vulnerability Testing/5. 05-Unified Diagnostics Services (UDS).mp4
- 46.82 MB
.pad/25
- 187.18 KB
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/3. 03-Display Data on OLED.mp4
- 45.58 MB
.pad/26
- 428.33 KB
[TutsNode.net] - 5. 04-CANAnalyzer Tool for Vulnerability Testing/1. 01-Installing CANAnalyzer with Docker.mp4
- 44.87 MB
.pad/27
- 132.87 KB
[TutsNode.net] - 6. 05-OBD2 Advance Concepts/2. 02-Types of OBD2 Protocols.mp4
- 39.78 MB
.pad/28
- 225.26 KB
[TutsNode.net] - 3. 02-Car Simulator Advance/1. 01-Car Simulator Advance.mp4
- 38.66 MB
.pad/29
- 353 KB
[TutsNode.net] - 11. 10-Appendix Soldering Crash Course/8. 08-Pinhole Soldering.mp4
- 35.4 MB
.pad/30
- 619.12 KB
[TutsNode.net] - 1. Introduction/1. Introduction.mp4
- 29.93 MB
.pad/31
- 70.57 KB
[TutsNode.net] - 2. 01-Overview of CAN Protocol and CAN-Utils/1. 01-Overview of CAN Protocol.mp4
- 29.9 MB
.pad/32
- 100.66 KB
[TutsNode.net] - 4. 03-CaringCaribou Tool for Vulnerability Testing/3. 03-Get Unique IDs.mp4
- 27.6 MB
.pad/33
- 413.69 KB
[TutsNode.net] - 7. 06-Creating Device with MCP2515/3. 03-Arduino Device code for CAN-Utils.mp4
- 27.05 MB
[TutsNode.net] - 9. 08-Creating ECU Modal with Two MCP2515 Devices/4.2 SENDER_bb.pdf
- 922.82 KB
.pad/34
- 47.62 KB
[TutsNode.net] - 7. 06-Creating Device with MCP2515/1. 01-MCP2515 Module.mp4
- 25.19 MB
.pad/35
- 825.1 KB
[TutsNode.net] - 11. 10-Appendix Soldering Crash Course/1. 01-Introduction and Precautions.mp4
- 23.97 MB
.pad/36
- 28.56 KB
[TutsNode.net] - 11. 10-Appendix Soldering Crash Course/3. 03-Basic rules of Soldering.mp4
- 20.91 MB
.pad/37
- 91.91 KB
[TutsNode.net] - 6. 05-OBD2 Advance Concepts/1. 01-What is OBD2.mp4
- 12.55 MB
Torrent Description
Description:
Description
Have you ever thought the car you drive can also be hacked and it’s also vulnerable to hackers ?
Welcome to the second course on Automobile Hacking and Security version 2.0.
In our first course we created our base on automobile security, learned the protocol on which modern day vehicles operate and looked at tools through which we can find vulnerabilities in cars and worked on real vehicles as well.
In this course we will look at some advanced and interesting concepts and see how deep the rabbit hole goes. We will start this course with the overview of the first course so all things revised and clear.
Then we will implement a car simulator with higher difficulty levels and look for advanced tools on automobile security starting with CaringCaribou. We will see how we can find all the unique IDS in CAN Network. We will work on Unified Diagnostics Services (UDS) and also see Fuzzer Brute Force Attack.
Then we will look at another advanced tool on automobile security CANAnalyzer which is a graphical tool. We will do Sniff and Send CAN Packets Attack and Fuzzer Test.
After that we will cover On-Board Diagnostic II (OBD2). We will see OBD2 Protocols and create OBD2 Universal connectors as well to communicate with real vehicles.
After that we will create a version 2.0 device with MCP2515 module to communicate with real vehicles and get real time data from cars.
Then will do a practical demo on a real car with version 2.0 device and OBD2 connector.
After that we will move to the very interesting part of this course in which we will create an Electronic Control Unit model ECU. This ECU unit will help us test all tools which we study in this course. We will also connect our version 2.0 device with this ECU unit and try to Reverse Engineer CAN Frames.
In the last one important thing this course is NOT for everyone But for anyone who is passionate about cybersecurity and has the ability to think out of the BOX!
Who this course is for:
For Cybersecurity Researchers
Ethical Hackers
Hobbyist and Learners
Anyone passionate about Cyber Security, But! Can think out of the box!!!
Requirements
Basic Knowledge of Linux
Completed Automobile Hacking and Security v1.0 (Recommended)
Hardware Requirements for Communicating with Real Vehicle (Find details inside course)
Last Updated 3/2023
Description
Have you ever thought the car you drive can also be hacked and it’s also vulnerable to hackers ?
Welcome to the second course on Automobile Hacking and Security version 2.0.
In our first course we created our base on automobile security, learned the protocol on which modern day vehicles operate and looked at tools through which we can find vulnerabilities in cars and worked on real vehicles as well.
In this course we will look at some advanced and interesting concepts and see how deep the rabbit hole goes. We will start this course with the overview of the first course so all things revised and clear.
Then we will implement a car simulator with higher difficulty levels and look for advanced tools on automobile security starting with CaringCaribou. We will see how we can find all the unique IDS in CAN Network. We will work on Unified Diagnostics Services (UDS) and also see Fuzzer Brute Force Attack.
Then we will look at another advanced tool on automobile security CANAnalyzer which is a graphical tool. We will do Sniff and Send CAN Packets Attack and Fuzzer Test.
After that we will cover On-Board Diagnostic II (OBD2). We will see OBD2 Protocols and create OBD2 Universal connectors as well to communicate with real vehicles.
After that we will create a version 2.0 device with MCP2515 module to communicate with real vehicles and get real time data from cars.
Then will do a practical demo on a real car with version 2.0 device and OBD2 connector.
After that we will move to the very interesting part of this course in which we will create an Electronic Control Unit model ECU. This ECU unit will help us test all tools which we study in this course. We will also connect our version 2.0 device with this ECU unit and try to Reverse Engineer CAN Frames.
In the last one important thing this course is NOT for everyone But for anyone who is passionate about cybersecurity and has the ability to think out of the BOX!
Who this course is for:
For Cybersecurity Researchers
Ethical Hackers
Hobbyist and Learners
Anyone passionate about Cyber Security, But! Can think out of the box!!!
Requirements
Basic Knowledge of Linux
Completed Automobile Hacking and Security v1.0 (Recommended)
Hardware Requirements for Communicating with Real Vehicle (Find details inside course)
Last Updated 3/2023